DSC SCW9045: How to Set the Time and Date?

Today we will show you how to set the time and date on the DSC SCW 9045 wireless security system. 

To Set the time and date: Press * 6 followed by the master code by default is "1234", use the < > scroll keys to find the menu option, then press * to select it, enter the time in military format (HH:MM) e.g. 8:00 pm = 20:00 hours, followed by the date (MM:DD:YY), Lastly, press # twice to exit programming.

The DSC SCW 9045 is and all-in-on wireless security system that allows you to add up to 32 433mhz wireless security sensors. The 9045 can hold up to 16 user codes and an additional code for designated towards the master code again which by default is "1234".

The SCW 9045 is a bit of an older security system that is no longer manufactured and as far as communicating alarm signals back to the central alarm monitoring station it is limited to two options. The first option would be if you have a compatible phone/VOIP line wired directly into the 9045 panel. The second option would be a universal cellular communicator such as, the Telular Tg-1 Express cellular alarm communicator. The Telular TG-1 express is a great way to salvage this outdated alarm panel because it allows for more modern modes of alarm monitoring services with its new 3G/4G options through both AT&T and Verizon.


 

Did you find this article helpful?