Can I Upgrade my 2GIG Go Control Panel to a 3G Cellular Communicator?

upgrade-2gig-gc2-security-system

Yes, 2GIG Go! control 2 panels can be upgraded from 2G to 3G cellular communicators as long as the panel firmware is at least 1.9.6.

The Go! Control 2 firmware version can be found on the interior of the control panel and is often labeled below where the cellular radio would be installed.

It can also be found in the installer programming menu, to accomplish this: from the home screen select security, menu, toolbox, enter the master code "default master code is 1111", scroll to the right once and press the version number. The next menu will give you various information about your 2GIG Go! Control wireless security system as well as the panel firmware version.

If the Go! Control panel is not 1.9.6 or higher than a firmware update will be necessary. To accomplish the firmware update you will need the firmware upgrade cable which is part number 2GIG UPCBL2. This cable will be connected to a computer as well as the control panel. Once the update cable has been connected you will need to download the newest firmware version before you can install a 3G cell radio through the 2GIG website.


If you are looking to reduce your monthly alarm monitoring rates for your home or business make sure to contact Geoarm Security at 1-877-443-6276 for your free consultation!  "You must have our 2GIG alarm monitoring services for us to perform this for you".  


Alarm Monitoring Services

2GIG GC2 Product Manuals

2GIG GC2 Frequently Asked Questions


 

Did you find this article helpful?