Why Does my 2GIG Go! Control not Power Up after Firmware Update?

2gig-gc2-upgrade-cellular-communicator

 
When updating the firmware on the 2GIG Go! Control 2 , its very important to find out what the firmware version is currently. Firmware versions that are 1.9.6 or later may be updated to the latest version available with no issue. However, firmware versions lower than 1.9.6 must be upgraded to firmware 1.13.0 before advancing the firmware to the latest versions or the 2GIG panel will not power up correctly.


To complete the firmware update process you will need the firmware upgrade cable which is part number 2GIG UPCBL2. This cable will be connected to a computer as well as the control panel. Once the update cable has been connected you can download the newest firmware version through the 2GIG website.
 
If you are looking to reduce your monthly alarm monitoring rates for your home or business make sure to contact Geoarm Security at 1-877-443-6276 for your free consultation! *We are usually able to takeover just about any kind of security system, so don’t hesitate.
 
 
2GIG GC2 Product Manuals
 

Attachments

2GIG_UPCBL2_Update_Instructions.pdf 2GIG_UPCBL2_Update_Instructions.pdf

Did you find this article helpful?