GE NX-592E-CDMA-ZX-VZ Troubleshooting Guide

ge-nx-592e-cdma-zx-vz-troubleshooting-guide

Click the link below to view the GE NX-592E-CDMA-ZX-VZ troubleshooting guide. In the NX-592E-CDMA-ZX-VZ troubleshooting guide you will get useful information when having issues with the cellular communicator in conjunction with a NetworX wired security system such as, 4V2, 6V2, 8V2, and 8E wired security systems.

The GE NX-592E CDMA Alarm.com cellular communicator can be used on NetworX 4V2, 6V2, 8V2, and 8E wired security systems. The communicator interfaces with the NetworX panel data bus and is powered by the panel. The Alarm.com bus module for NX is made of two parts: A bus module (NX-592E) that connects to the panel via 3 bus wires, and the CDMA radio daughter board that plugs onto the NX Gateway board. The CDMA radio daughter board is the only new part.


If you are looking to reduce your monthly alarm monitoring rates for your home or business make sure to contact Geoarm Security at 1-877-443-6276 for your free consultation! *We are usually able to takeover just about any kind of security system, so don’t hesitate.

Alarm Monitoring Services

GE NX-592E-CDMA-ZX-VZ Product Manuals

GE NX-592E-CDMA-ZX-VZ FAQ's



 

Did you find this article helpful?