DSC Alexor FAQ's

Setting Time and Date

To set your Time and Date on the Alexor system, you will need to know the Master arming and Disarming code for the System. You will need to follow these steps " Enter *6 + Master User Code + 1 + Time in Militar...

Read Article

Changing Master Code

In order to do this, you will already need to know the CURRENT master code. GO to your keypad and hit " *5 + CURRENT MASTER CODE + 40 + NEW MASTER CODE + # "

Read Article

Is the Alexor Wireless

Yes, the DSC Alexor Panel is a fully Wireless System Capable of using up to 32 Wireless Sensors

Read Article

Adding User Codes

To add user codes, you will need to follow this procedure " *5 + MASTER CODE + 01 + NEW CODE " and if you would like to add more than one, you will need to change the 01 in the sequence to 02, 03, 04, etc. for ...

Read Article

Can it use Cellular or Internet Communication

The DSC Alexor system was, at one point, able to be activated over a Wireless cellular network. We no longer are able to activate the DSC Alexor due to the 2G sunset from AT&T and DSC releasing newer panels...

Read Article

How to Bypass

In order to bypass a sensor you must enter " *1 + (2 Digit Zone #) + # " and if that does not work, you can try " *1 + Master Code + (2 Digit Zone Number) + # "

Read Article

Checking Troubles

In order to check troubles on the DSC Alexor, you will need to enter *2 on the keypad. At that point a totally different number should show up. Once you get this number, please document it and refer to the trou...

Read Article