DSC PowerSeries SCW9045 FAQ's

DSC SCW9045: How many Zones can this System Support?

The DSC SCW 9045 is and all-in-on wireless security system that allows you to add up to 32 433mhz wireless security sensors. The 9045 can hold up to 16 user codes and an additional code for designated towards t...

Read Article

DSC SCW9045: How to Set the Time and Date?

Today we will show you how to set the time and date on the DSC SCW 9045 wireless security system. To Set the time and date: Press * 6 followed by the master code by default is "1234", use the < > scroll...

Read Article

DSC SCW9045: How to Program User Codes?

Learn how to program user codes into the DSC SCW 9045 wireless security system. To Program User Codes: Press * 5 followed by your master code by default is "1234", the armed (padlock) indicator will turn on. ...

Read Article

DSC SCW9045: How to Bypass a Zone?

Learn how to bypass a zone on the DSC SCW 9045 wireless security system. To Bypass a Zone With the system disarmed: Press *1 to enter the bypass mode. If the Code Required for Bypass option is enabled, enter a...

Read Article

How to Correct Loss of Clock Trouble Condition on a DSC SCW9045?

Here you will learn how to correct the loss of clock trouble condition on the DSC SCW 9045 wireless security system. The loss of clock trouble condition typically populates after you have power cycled or reset ...

Read Article

DSC SCW9045: How to Disarm the System?

Learn how to disarm the DSC SCW 9045 wireless security system. To Disarm the DSC SCW 9045: The user must enter through a door programmed as Delay. Upon entering, the keypad will emit a steady tone (and emit a ...

Read Article