Honeywell SiXSMOKE FAQ's

Can the Honeywell SiXSMOKE be Auto Programmed?

Yes, the Honeywell SiXSMOKE can be auto programmed, when the Lyric controller is ready to receive the transmitter's information, pulling the battery tabs or pressing the test button will cause the SiXSMOKE to ...

Read Article

How Long Does the Honeywell SiXSMOKE Battery Last?

The Honeywell SiXSMOKE encrypted wireless smoke/heat detector has a battery life of 5 years with (typical use). Note: Do not mix old and new batteries, battery types or manufacturers. SiXSMOKE wireless smoke/h...

Read Article

What Systems Does the Honeywell SiXSMOKE Work With?

The Honeywell SiXSMOKE encrypted wireless smoke/heat detector is for use with Honeywell systems that support SiX series devices. Once the device is enrolled into the panel, it cannot be used with another contr...

Read Article

What is the Honeywell SiXSMOKE Coverage Area?

The Honeywell SiXSMOKE encrypted wireless smoke/heat detector has a maximum coverage area of 50ft x 50ft (refer to National Fire Alarm Code Standard NFPA 72 for application requirements). The SiXSMOKE Two-Way W...

Read Article

Can the Honeywell SiXSMOKE be Flash Upgraded?

Yes, the Honeywell SiXSMOKE can be remotely upgraded via AlarmNet 360, or locally upgraded via the Lyric Panel. When the panel is updated all the SiX wireless devices (except Fobs) are updated as well. The SiX...

Read Article

Does the Honeywell SiXSMOKE have LED's?

Yes, the Honeywell SiXSMOKE has one Bi-Colored LED that lights Red or Green to indicate enrollment status into the Lyric controller, Maintenance, Tamper, Low Battery, and Alarms via Test, Heat, and Smoke. Smoke...

Read Article

How Long do Honeywell SiXSMOKE Sensors Last?

The Honeywell SiXSMOKE has no specified limitation to the life of this detector. It should be tested annually for sensitivity and smoke entry testing. The SiXSMOKE wireless smoke/heat detector is for use with H...

Read Article

Does the Honeywell SiXSMOKE have Low Battery Detection?

Yes, the Honeywell SiXSMOKE encrypted wireless smoke/heat detector will always report its battery status to the control panel so the battery level can always be viewed on the ZONES screen or remotely via AlarmN...

Read Article

Where to Mount the Honeywell SiXSMOKE?

The Honeywell SiXSMOKE encrypted wireless smoke/heat detector can be mounted on the ceiling or on the wall (if local ordinances permit). Select a location and mount using the included mounting hardware. Refer t...

Read Article

Do all of the Honeywell SiXSMOKE Sensors Go Off?

Yes, the Honeywell SiXSMOKE detectors can be set up to sound all smokes when any go into alarm. This is an adjustable feature for each smoke detector in the Lyric controller zone programming. The SiXSMOKE featu...

Read Article