Can I Switch from Phone Line to Cell Monitoring on the Concord 4?

concord4-switch-phoneline-cellular-communicator

Yes, you can switch your Interlogix Concord 4 hybrid security system from the phone line to cellular communications. The Access Code Lock (field 0003) in installer programming must be turned off in order for this to work. 

A Cellular Comm test will also need to be performed prior to trying to send alarm signals, After connecting your Cellular module (600-1053-3-ZWAVE-AT / 600-1053-4-ZX-VZ
to your Concord 4 Alarm Panel and registration has been completed with your monitoring provider.

To run a cellular comm test on an Interlogix Concord 4 system Press 8 + Installer Code (default 4321) + 2, then disarm the system immediately, This procedure will initiate the comm test on your Concord 4.


Interlogix Concord 4 Alarm Monitoring Options

Interlogix Concord 4 Frequently Asked Questions



 
  

Did you find this article helpful?