How to Turn On/Off Chime When Sensor Closes?
If you are looking to have your Interlogix Concord Express chime when your door/window sensor closes there is a way to toggle that. This feature is called Chime On Close, This setting determines whether or not a single chime is sounded when a perimeter door or window is closed and can be activated by following our instructions listed below. By default, the Concord Express has this feature by default set to off so, if you don't hear your sensors chiming when they are closed you will need to follow these steps below.
To turn Chime On Close off or on:
1. Enter user programming mode with the system master code. The display shows TIME AND DATE.
2. Press A or B until the display shows OPTIONS, then press #. The display shows DOWNLOADING OFF/ON.
3. Press A or B until the display shows CHIME ON CLOSE OFF/ON (current setting).
4. Press 1 (off) or 2 (on). The display flashes the entered selection. Press # and the display shows the new setting.
Keep in mind the Interlogix Concord Express is no longer manufactured and is classified as discontinued.
Interlogix Concord Express Alarm Monitoring Options
How to Upgrade My Concord Express System
Did you find this article helpful?