To set the DSC Powerseries Pc1616 system time and date you will need to know the master code for the System. You will need to follow these steps " Enter *6 + 4-digit Master User Code + 1 + Time in Military Form...
Read ArticleIn order to change the DSC Powerseries Pc1616 system master code, you will need to know the current 4-digit master code. Go to your keypad and hit * 5 + current 4-digit master code + 40 + New Master Code + #. ...
Read ArticleYes, The DSC Powerseries PC1616 can hold up to 32 wireless sensors if its the newer version. If it is an older version, it can only do 16. You will also need to make sure that you have a compatible wireless rec...
Read ArticleTo add user codes on the DSC Powerseries PC1616 you will need to follow this procedure * 5 + 4-digit Master Code + 01 + New 4-digit Code" and if you would like to add more than one, you will need to change the ...
Read ArticleIn order to bypass a sensor on the DSC Pc1616 security system you must enter * 1 + (2 Digit Zone #) + # " and if that does not work, you can try * 1 + 4-digit-master code + (2 Digit Zone Number) + # . Bypassing...
Read ArticleIn order to check and clear troubles on the DSC PC1616, you will need to enter *2 on the keypad. At that point, a totally different number should show up. Once you get this number, please document it and refer ...
Read ArticleIf you have just moved into a new home or business you may have an existing security system installed from a previous company such as ADT. If you have found that you have a DSC Powerseries PC 1616 wired securit...
Read Article
