To set the DSC Powerseries PC1555 security system's time and date you will need to know the master code for the System. You will need to follow these steps " Enter *6 + 4-digit Master User Code + 1 + Time in Mi...
Read ArticleIn order to change the DSC Powerseries PC1555 system master code, you will need to know the current 4-digit master code. Go to your keypad and hit * 5 + current 4-digit master code + 40 + New Master Code + #. ...
Read ArticleYes, The DSC PC1555 security system can use wireless sensors you need to make sure that you have a compatible wireless receiver for this unit which is the DSC RF5132-433. Once you have added this wireless rec...
Read ArticleTo add user codes on the DSC Powerseries PC1555 you will need to follow this procedure * 5 + 4-digit Master Code + 01 + New 4-digit Code" and if you would like to add more than one, you will need to change the ...
Read ArticleIn order to check and clear troubles on the DSC PC1555 security system you will need to enter *2 on the keypad. At that point, a totally different number should show up. Once you get this number, please documen...
Read ArticleIf you have just moved into a new home or business you may have an existing security system installed from a previous company such as ADT. If you have found that you have a DSC Powerseries PC1555 wired security...
Read ArticleIn order to bypass a sensor on the DSC Powerseries PC1616 security system you must enter * 1 + (2 Digit Zone #) + # " and if that does not work, you can try * 1 + 4-digit-master code + (2 Digit Zone Number) + #...
Read Article
