Name is required.
Email address is required.
Invalid email address
Answer is required.
Exceeding max length of 5KB

DSC PowerSeries PC1616: Revision Number Needed to do Telular Home Control?

Adam — Mar 19, 2015 12:34PM EDT

What revision number does my DSC PowerSeries PC1616 have to be in order to use Telular Home Control Interactive alarm monitoring services.


1 Community Answers

HelpDesk5 - Mar 20, 2015 05:36PM EDT Best Answer

In order to do Home Control Interactive monitoring your panel must be revision 4.5 or higher and you must have a tl260r internet communicator, 3g2060r cellular communicator or a TL2603GR dual path communicator. Once you are connected to The interactive monitoring your system will automatically update your panel to 4.6 which is the latest revision number. If you are looking to add Home automation to the mix than you must also in addition have a asg1000-1t5nas hub which the link can be found below.

If you system revision number is lower than 4.5 you must swap your panel board for a newer one which you can find the link underneath this message. Or contact us for alternate options for an different interactive interface 1-877-443-6276

DSC PC 1616 : http://www.geoarm.com/pc1616-dsc-powerseries-alarm-control-panel.html

Monitoring: http://www.geoarm.com/telular-cellular-interactive-alarm-monitoring-home-control-for-dsc-security-systems.html
HUB : http://www.geoarm.com/asg1000-1t5nas-interactive-telguard-homecontrol-hub.html
Internet Communicator : http://www.geoarm.com/tl260r-dsc-powerseries-broadband-internet-alarm-communicator.html
Cellular Communicator : http://www.geoarm.com/3g2060r-dsc-connect-24-wireless-cellular-3g-alarm-communicator.html

Post Your Public Answer