1361X10 Transformer Install

1. Splice one end of a 3-conductor cable to the wire ends of the SA4120XM-1 Cable.

2. Connect the SA4120XM-1 cable plug to the 8-pin connector on the control (see the Summary of Connections diagram for location of the 8-pin connector).

3. Connect the other end of the 3-conductor cable to the 1361X10 Transformer, as shown in Figure 4.

Installation Manual For More Information:

https://turbifycdn.com/ty/cdn/yhst-51756635596032/honeywell-vista-15p-control-panel-installation-setup-guide.pdf