Qolsys

IQ4 & IQ2

• Disable Auto Stay
• Change Volume
• Change Language
• Clean Screen Mode
• View Message Alerts
• Enter Settings
• Enter Advanced Settings
• Run a Scene
• Smart Base Wall mount Installation
• Setup IQ panel 4 Panel - IQ4 Panel
• Default Master Code
• Default Dealer Code
• Default Installer Code
• Manage Users - Change Duress code
• Program A Sensor - Auto Learn Mode
• Change Installer Code
• Forgot Dealer Code - Forgot Installer Code
• Reset To Factory
• Change Date and Time
• Sensor Test
• Run a Wifi Test
• Run a Z Wave Test
• Run a Dual Path Test
• Run a Daughter Cards Test
• Run a Panel Test
• Run an Input Voltage Test
• Run a PowerG Test
• Run a Panel Glass Break Test
• Run a Ambient Noise Test
• Change Temperature Measurement
• Check Panel Status - Check Alarm Status - Check History
• Trigger a panic alarm
• View Z Wave Status - Z Wave Device Status
• View Other Z Wave Devices
• View Automation Processes
• View Activity Monitoring Sensors
• View Licenses
• Manage Energy Optimization
• Manage Wifi Devices
• Connect To Wifi - learn Into Wifi
• Manage Access Point Settings
• Manage Access Point Connection
• Manage IQ Remote Devices
• Manage 3rd Party Connections
• Manage Z Wave Devices
• Add Z Wave Device
• Edit Z Wave Devices
• Remove Z-Wave Device
• Z wave failed to learn - Delete Failed Z wave device
• Wipe all Z-Wave Devices - Clear all Z Wave Devices
• View associations Z Wave Devices - Edit Association Z Wave Devices
• Manage Z Wave Device Options - Z Wave Settings
• Activate Z Wave Through Camera - Smart Start
• Manage Z Wave Provisioning List
• Connect Phone With Bluetooth
• Edit Bluetooth Device
• Delete Bluetooth Device
• Manage Bluetooth Settings
• Ignoring Sensors After A Power Cycle - SIA Power Restoration
• Increase Security - Require Code Before Use - EN Grade 2
• Delete a Sensor - Deleting Sensors
• Documentation
• Local Automation
• Update Panel
• Power Down Panel From Settings
• Power Cycle From Panel - Reboot Panel
• View Internal Storage
• View Wif Information
• View PowerG System Info
• View Z-Wave System Info
• Find IMEI
• View Cellular Information
• View Panel Info
• View Patches - Upgrade Info
• View Hardware Information
• View Software Information
• Battery Information
• Allow Master Code To Access Camera Settings
• Settings Photos Settings
• Alarm Photos Settings
• Disarm Photos Settings
• Panel Camera Usage
• Secure Delete Images
• Manage Camera Settings
• Change Exit - Entry Delay
• Enable Master Code to Access Security and Arming
• Change Engineer Reset Option
• Enable Keyfob Instant Arming
• Enable Keyfob to Disarm System
• Enable Exit Time Extension
• Disable Arm Stay Counter
• Auto Bypassing
• Refuse Arming When Low Battery
• Enable Secure Arming
• Enable Screen Lock
• Disable Panel Tamper
• Enable Swinger Shutdown
• Change PowerG Siren Options
• Change Siren Timeout
• Change Dialer Delay
• Configure Panel Sirens
• Enable Siren Annunciation
• Enable Two Trip Verifications For Alarms
• Allow Master Code To Access Sirens and Alarms
• Manage System Logs
• Erase All User Data
• Panel Motion Detector
• Enable Panel Glass Break Detector
• Allow Master Code To Manage Sensors
• Detect Sensor Jams - Detect RF Jam
• Enable Wellness Page
• Change PowerG Image Capture Count
• Change Z Wave Frequency Reigon
• Enable Deako Intergration
• Allow Master Code to Access Security
• Set Quicker Communication Tests
• Enable Commercial Sensor and Device Names
• Enable 6 Digit User Codes
• Add Languages In Panel
• Change Brightness

See more