Enroll New Sensors - Add new sensors - Learn new sensor

NOTICE: Most Sensor Types have a video attached at the bottom

1) Go to settings with installer code (default 1561)

2) Go to the installer toolbox

3) Go into Panel Programming

4) Go into Wireless Zones

5) Select the next available zone and select equipment code

6) Go down the List of settings that need to be adjusted

7) The TXID can be auto-learned by opening the sensor panel after selecting "Learn"

Notes: 

- Each Setting has a helpful guide as to which setting to select 


Videos:

PIR1e Programming Motion Detector:



Key2e Programming Key Fob:



DW10e Programming Contact:



FT6e Programming Water Leak:



SMKT8e Programming Smoke Detector:



Enrolling SMKT8e Heat Detector:



Enrolling SMKT8e Freeze Detector: