-
GeoArm
-
GeoAlarm
-
2GIG
-
M2M
-
Qolsys
-
FBI
-
Honeywell
-
Alarm.Com
- App
- FAQ
- ADC-SEM-100-LTE
- ADC-SEM110-PS-VZ
- ADC-SEM210-PS-AT
- ADC-SEM210-PS-TL
- ADC-SEM210-PS-VZ
- ADC-SEM300-PS-AT-M
- ADC-SEM300-PS-VZ-M
- ADC-SEM110-VT-VZ
- ADC-SEM210-VT-VZ
- ADC-SEM210-VT-AT
- ADC-SEM210-VT-TL
- ADC-SEM300-VT-VZ
- ADC-SEM300-VT-AT
- ADC-SEM300-VT-AT-M
- ADC-SEM300-VT-VZ-M
- ADC-V515
- ADC-V523X
- ADC-V723X
- ADC-V724X
- ADC-V821
- ADC-VC727P
- ADC-VC728PF
- ADC-VC827P
- ADC-VC838PF
- ADC-VC847PF
-
Alula
-
DSC
Firmware Update
Note: This option is only available if a USB update is available1) Enter System Settings
2) Select Firmware updates
3) A test will be performed to determine if the panel is ready for an update
4) Tap Update to being USB Update Process
NOTE: Red icons next to a specific requirement
indicates that the test failed. Remedy the error,
then repeat steps 1 through 3.
![2gig-edg-rk-2gig-wireless-secondary-touchscreen-alarm-keypad-for-2gig-edge-panels-26](https://support.geoarm.com/hs-fs/hubfs/2gig-edg-rk-2gig-wireless-secondary-touchscreen-alarm-keypad-for-2gig-edge-panels-26.png?width=600&height=600&name=2gig-edg-rk-2gig-wireless-secondary-touchscreen-alarm-keypad-for-2gig-edge-panels-26.png)