Add New Sensor - Enroll New Sensor

There is a video attached to this document at the bottom to enroll all types of sensors

1. Press " Security "

2. Press " Menu "

3. Enter Installer Code (Default: 1561)

4. Hit the " --> " button twice or until you are on page 3 of toolbox

5. Press Installer Tool Box

6. Press System Configuration

7. Press the  "-->  "button until you are on a unused zone

8 Press  down arrow to change sensor code

9. Press  "-->  " until you get the correct sensor type

10. Press down arrow when you are complete

11. Enter the equipment code of the sensor

12. Press the Down arrow and it will ask if you want the device to act normally

13.  Press the Down arrow to then enter the serial number of the device OR press shift and hit learn to auto learn the serial number by tampering the sensor.

How to Install Contact: 



How to Install Heat Detector: 



How to Install Motion Detector:



How to Install Glass Break:



How to Install Key Fob:



How to Install External Contact:



How to Install Low Temp/ Freeze Detector: