- Support Center
- Alarm.Com
- ADC-SEM300-VT-AT
-
GeoArm
-
GeoAlarm
-
2GIG
-
M2M
-
Qolsys
-
FBI
-
Honeywell
-
Alarm.Com
- App
- FAQ
- ADC-SEM-100-LTE
- ADC-SEM110-PS-VZ
- ADC-SEM210-PS-AT
- ADC-SEM210-PS-TL
- ADC-SEM210-PS-VZ
- ADC-SEM300-PS-AT-M
- ADC-SEM300-PS-VZ-M
- ADC-SEM110-VT-VZ
- ADC-SEM210-VT-VZ
- ADC-SEM210-VT-AT
- ADC-SEM210-VT-TL
- ADC-SEM300-VT-VZ
- ADC-SEM300-VT-AT
- ADC-SEM300-VT-AT-M
- ADC-SEM300-VT-VZ-M
- ADC-V515
- ADC-V523X
- ADC-V723X
- ADC-V724X
- ADC-V821
- ADC-VC727P
- ADC-VC728PF
- ADC-VC827P
- ADC-VC838PF
- ADC-VC847PF
-
Alula
-
DSC
ADC-SEM300-VT-AT Communication Failures
Start with power cycling the Entire System by removing a lead from the backup battery, and unplugging the power supply from the outlet in the wall. Leave it powered down for 20 seconds. RE-apply power. Once re-applied, do not touch Keypad or Power for 10-20 minutes so Startup and the required Syncing between Panel and the ADC-SEM300-VT-AT can be completed. If this does not clear the issue, there may be other troubles between the Panel and ADC-SEM300-VT-AT, and further troubleshooting with a GeoArm Certified Technician may be required. Please see picture below for a Visual Guide on Power Cycling your Panel.
![undefined](https://cdn.livechat-static.com/api/file/kb/file/14150592/8352ae1d83-3ec58ddbbb0ea66bc8c8.png)
If Further assistance is required, please schedule a time to speak with a GeoArm Certified Technician here.