Change Sensor Type - Change Sensor Entry Delay - GeoAlarm

To enter the Sensor settings of your GeoAlarm panel, start by:

1) Press the Hamburger Button on the top left

2) Enter Master Code, this is the code you initialized your panel with.

3) Enter the devices tab

4) Select the desired sensor that you would like to view/edit

5) Press the selected sensor again to enter its settings.

6) Pressing Sensor Type Will enter the sensor's programming type.

Here you can change the sensor to have a longer entry timer or become any of the following types: Perimeter, Interior Follower, Report Only, 24hr Siren, 24-hour pulsed, 24hr buzzer, 24-hour silent