L3000 Lynx
      Back to home
      1. Support Center
      2. Honeywell
      3. L3000 Lynx

      AC Loss Report Code

      1) Enter Installer Code on the panel while disarmed (Default 4112) + 800

      2) You Will now see 20 INSTALLER CODE if that was the correct installer code.

      3) Press *62 to change AC Loss Report Code

      4) Press *99 After the screen updates to the next field to exit programming

      Note: GeoArm can change the installer code upon activation

      Follow Install manual for more information: 
      https://turbifycdn.com/ty/cdn/yhst-51756635596032/l3000-honeywell-lynx-plus-wireless-control-panel-installation-and-setup-guide.pdf