Primary Phone Number

1) Enter Installer Code on the panel while disarmed (Default 4112) + 800

2) You Will now see 20 INSTALLER CODE if that was the correct installer code.

3) Press *41

Enter up to 20 digits and press * to complete if there is fewer than 20 digits. To clear the entry press *41*

4) Press *99 After the screen updates to the next field to exit the programming

Note: GeoArm can change the installer code upon activation

Note: Backup reporting (8 attempts are made to the secondary phone number if no kissoff
is received after 8 attempts to the primary number) is automatic only if there is a
secondary phone number (field ✻42).