Single Alarm sounding Per Zone

1) Enter Installer Code on the panel while disarmed (Default 4112) + 800

2) You Will now see 20 INSTALLER CODE if that was the correct installer code.

3) Press *31

Enter the appropriate start and end weekend of the month.

UL installations: must be 0 (no limit)


Lynx Plus SELECTIONS
0 = no limit on alarm sounding per zone
1 = limit alarm sounding to once per arming period for a given zone


LynxSIA Plus SELECTIONS
0 = alarm sounding per zone will be the same as Swinger Shutdown set in field ✻92
1 = limit alarm sounding to once per arming period for a given zone

4) Press *99 After the screen updates to the next field to exit the programming

Note: GeoArm can change the installer code upon activation