Entering Tools - Installer Tool Box

1. Power up the control and allow it to “boot up”. “System Standby” is displayed on the touch screen. When the
“boot-up” is complete (approximately 1-2 minutes) “Ready to Arm” is displayed.

2. Select the “Security” icon.

3. Select the “More” tab on the first page of the Security Screen.

4. Select the “Tools” icon.

5. Enter the Installer Code (Defualt: 4 + 1 + 1 + 2)


For the Programming Guide

https://turbifycdn.com/ty/cdn/yhst-51756635596032/honeywell-lynx-touch-l7000-lynx-touch-programming-guide.pdf