How to Add a Z-Wave Light Switch to a Lyric Controller

To add a Z-Wave light switch to the Honeywell Lyric Controller install the receptacle, wall switch or lamp/appliances module before including it into the system. Make sure to refer to the device's instructions for more information about installation. 

To add a Z-Wave light switch to the Honeywell Lyric Controller follow the steps below:

1) On the Automation management screen, press the down arrow.

2) Press Tools

3) On screen options appear, including Include Devices, Exclude Devices and
Advanced Tools

4) Select Include Device

5) Press the devices function button within 60 seconds. (Note that the location of the function button varies with the device you are adding. See the devices instructions.

6) To include additional devices, repeat steps 1-5. or press abort to complete the inclusion process.

7) Press return to return to the previous screen.

*When adding a Z-Wave device it may be necessary to perform the Exclude procedure before the device can be included successfully.