How to Install the Lyric Controller Battery

1. Insert the battery pack into controller’s rear case.

2. Install the battery retainer.

3. Secure the battery retainer with the provided screw.

4. Connect the battery pack connector to the receptacle on the back of the controller.

5. Align the slots on the back of the controller with the hooks on the wall mount as shown below.

6. Once attached, insert the screw to secure the controller to the wall mount.

7. Plug the power supply into a 24-hour, 110VAC unswitched outlet. Upon power-up, the “System Standby!” screen will be displayed.