How to Install the Lyric Controller Cellular Radios

To install the Honeywell Lyric Controller cellular radios follow the instructions below : 

1. At the Lyric controller Installer Programming Menu screen select “Test” OR in the Master User Tools Menu Programming screen select “Advanced”.

2. Select “Install Cellular Module” and follow the prompts displayed on the controller or follow the steps below.

3. Remove controller side cover (bezel).

4. Remove the screw securing the module to the controller (if installed).

5. Remove the existing Cellular Communications Module (if installed).

6. Install the Cellular Communications Module into the controller.

7. Ensure that the Communications Module is properly seated into the controller and secure the module with the provided screw (if required).

8. Insert the side cover (bezel) into the controller.

9. Slide the side cover (bezel) down to lock it in place and secure the Communications Module.

10. Select OK to complete the installation.