Vista 20p & Vista 15p
      Back to home
      1. Support Center
      2. Honeywell
      3. Vista 20p & Vista 15p

      Event Log Enables

      1) enter Installer Code into a PROGRAMMING KEYPAD ONLY (Default 4112) + 800

      2) enter *90

      3) Enter Desired Field (Input guide will be posted below this)

      Inputs:

      NOTE: System messages are logged when any non-zero entry is made.

       0 = None
       1 = Alarm/Alarm Restore
       2 = Trouble/Trouble Restore
       4 = Bypass/Bypass Restore
       8 = Open/Close. Example: To select “Alarm/Alarm Restore”, and “Open/Close”, enter 9 (1 + 8); To select all, enter #15.

      4) enter *99 to exit programming

      Note:
      The Vista 15P does not have partitions, any fields dealing with partitions will not be available on the Vista 15P

      Programming Manual For More Information:

      https://turbifycdn.com/ty/cdn/yhst-51756635596032/honeywell-vista-20p-control-panel-programming-guide.pdf

      GeoArm can assist in changing the installer code upon activation.