Option Selection - Enable Remote Internet Services - Enabling App Control In Programming

1) enter Installer Code into a PROGRAMMING KEYPAD ONLY (Default 4112) + 800

2) enter *91

3) Enter Desired Field (Input guide will be posted below this)

Inputs:

Note: If you are using remote internet services, input 8 + 2 here.

0 = None

4 = AAV

8 = Exit Delay Restart/Reset UL: must be disabled #+12 = AAV and Exit Delay Restart/Reset
SIA Guidelines: Exit Delay should be enabled. 

4) enter *99 to exit programming

Note:
The Vista 15P does not have partitions, any fields dealing with partitions will not be available on the Vista 15P

Programming Manual For More Information:

https://turbifycdn.com/ty/cdn/yhst-51756635596032/honeywell-vista-20p-control-panel-programming-guide.pdf

GeoArm can assist in changing the installer code upon activation.