Partition 2 Primary Account Number

1) enter Installer Code into a PROGRAMMING KEYPAD ONLY (Default 4112) + 800

2) enter *45

3) Enter Desired Field (Input guide will be posted below this)

Inputs:

Enter 4 or 10 digits
To clear entries, press *

0-9 = 0-9
#+11 = B
#+12 = C
#+13 for D
#+14 for E
#+15 for F

GeoArm uses 4 digit account numbers

4) enter *99 to exit programming

Note:
The Vista 15P does not have partitions, any fields dealing with partitions other than [1] will not be available on the Vista 15P

Programming Manual For More Information:

https://turbifycdn.com/ty/cdn/yhst-51756635596032/honeywell-vista-20p-control-panel-programming-guide.pdf

GeoArm can assist in changing the installer code upon activation.