Prepare System for Activation of Monitoring

This article is a list of steps that you can take to prepare your system for a smoother activation process

1) Have panel installed  https://support.geoarm.com/installing-the-security-system-vista-15p-20p/

2) Install communicator if possible (We have many guides on our youtube page and on here that assist in installing communicators) https://support.geoarm.com/communicator-install-videos/

3)  Write down the Serial numbers required for your communicator  https://support.geoarm.com/locate-mac-and-crc-or-serial-number/

4) Have a couple sensors installed so that we can test the system after activation  https://support.geoarm.com/zone-programming-menu-mode-programming-a-new-zone-20p-adding-a-new-sensor-vista-15p/

During the activation process with GeoArm we will assist with any programming that is needed for communication with our central station, any other programming and technical assistance may require additional charges.