Secure Enrollment Failed

 The Secure Enrollment Failed trouble condition indicates that a Z-Wave device failed secure enrollment. 

 For information on secure enrollment, see What is Z-Wave secure enrollment?.

How to resolve:

1. Power cycle the device.
2. Remove the Z-Wave device from the system and start the enrollment process again, verifying the Z-Wave device is within 3 to 6 feet from the panel.
3. If secure enrollment fails again, remove the Z-Wave device from the system, factory reset the device, then attempt the enrollment process again.
4. If secure enrollment continues to fail, remove all Z-Wave devices from the panel. (This must be done by your Alarm Dealer.)

For more advanced troubleshooting information, see Z-Wave device is not completing secure enrollment.