- Support Center
- Honeywell
- L7000-L5210-L5200
-
GeoArm
-
GeoAlarm
-
2GIG
-
M2M
-
Qolsys
-
FBI
-
Honeywell
-
Alarm.Com
- App
- FAQ
- ADC-SEM-100-LTE
- ADC-SEM110-PS-VZ
- ADC-SEM210-PS-AT
- ADC-SEM210-PS-TL
- ADC-SEM210-PS-VZ
- ADC-SEM300-PS-AT-M
- ADC-SEM300-PS-VZ-M
- ADC-SEM110-VT-VZ
- ADC-SEM210-VT-VZ
- ADC-SEM210-VT-AT
- ADC-SEM210-VT-TL
- ADC-SEM300-VT-VZ
- ADC-SEM300-VT-AT
- ADC-SEM300-VT-AT-M
- ADC-SEM300-VT-VZ-M
- ADC-V515
- ADC-V523X
- ADC-V723X
- ADC-V724X
- ADC-V821
- ADC-VC727P
- ADC-VC728PF
- ADC-VC827P
- ADC-VC838PF
- ADC-VC847PF
-
Alula
-
DSC
View Communicator Information
1.) Press Security Button (If you don't see it on the screen try from step 2)2) Press the 'more' button
3) Press 'Tools'
4) Enter Installer Code (default 4112)
If you do not see 'Program' then you are not entering the correct installer code and need to follow these instructions to change them: https://21880248.hs-sites.com/knowledge/honeywell/l7000-l5210-l5200/resettheinstallercode
5) Press 'Program'
6) Press ' Communicator'
Here you can view the installed communicator's information
![l5200-honeywell-lynx-touch-wireless-touchscreen-control-panel-10](https://support.geoarm.com/hs-fs/hubfs/l5200-honeywell-lynx-touch-wireless-touchscreen-control-panel-10.png?width=600&height=600&name=l5200-honeywell-lynx-touch-wireless-touchscreen-control-panel-10.png)